Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GQ7000X
Title: LIGHTING (EXT): REAR LIGHT ASSEMBLY: DISASSEMBLY (2008 Sequoia)

DISASSEMBLY

1. REMOVE REAR LIGHT GASKET LH

(a) Remove the rear light gasket.

NOTICE:

  • Detach the gasket if it adheres to the body.
  • Do not reuse a removed gasket. Replace it with a new one to prevent water from entering.

2. REMOVE TAIL LIGHT BULB

(a) Turn the tail light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

(b) Remove the tail light bulb from the light socket.

3. REMOVE BACK UP LIGHT BULB

(a) Turn the back up light socket and bulb, in the direction indicated by the arrow in the illustration, to remove them.

(b) Remove the back up light bulb from the light socket.

4. REMOVE WIRE HARNESS

(a) Disengage the harness clamp and remove the wire harness.